ReplaceCosts.com

How much does it cost to replace a driveway in 2026?

Interactive estimate from published 2026 national cost data, adjusted by state. No email, no phone number — just the range you should expect before talking to contractors.

Planning estimate (per sq ft (concrete, incl. demo)) — actual quotes vary with site conditions. Get 3+ written quotes.

What drives the cost

Repair or replace?

Cracks under ~1/4 inch are maintenance (fill annually). Resurfacing ($3–$5/sq ft) handles surface spalling if the base is sound. Replace when slabs heave, settle unevenly, or cracking is structural — patching a failed base never holds.

Frequently asked questions

How much does it cost to replace a driveway in 2026?

Nationally, expect roughly $4,800–$10,800 for a typical project (600 sq ft) at mid-range quality (per sq ft (concrete, incl. demo)). High-cost states run 15–35% above these numbers and low-cost states 5–15% below — use the calculator above to adjust for your state, project size and quality tier.

Should I repair or replace my driveway?

Cracks under ~1/4 inch are maintenance (fill annually). Resurfacing ($3–$5/sq ft) handles surface spalling if the base is sound. Replace when slabs heave, settle unevenly, or cracking is structural — patching a failed base never holds.

What drives driveway replacement cost up or down?

Demolition and haul-away of the old slab (~$1–$2/sq ft); Grade, drainage and base preparation; Thickness: 4" standard vs 5–6" for heavy vehicles; Climate: freeze-thaw regions need air-entrained mix and joints.

Methodology & sources

All replacement cost calculators