How much does it cost to replace a siding in 2026?
Interactive estimate from published 2026 national cost data, adjusted by state.
No email, no phone number — just the range you should expect before talking to contractors.
–
Planning estimate (per sq ft (vinyl, installed)) — actual quotes vary with site conditions. Get 3+ written quotes.
What drives the cost
Removal of existing siding adds $1,000–$3,000
Grade: builder ($2–4/sq ft) to premium ($8–12/sq ft) is a 3× spread
Trim, soffit and fascia work often ride along
Sheathing or moisture damage found underneath
Repair or replace?
Cracked or wind-torn panels can be swapped individually if you can match the profile and color. Replace whole walls or the whole house when fading makes patches obvious, or when moisture is getting behind the siding.
Frequently asked questions
How much does it cost to replace a siding in 2026?
Nationally, expect roughly $11,000–$19,000 for a typical project (2,000 sq ft) at mid-range quality (per sq ft (vinyl, installed)). High-cost states run 15–35% above these numbers and low-cost states 5–15% below — use the calculator above to adjust for your state, project size and quality tier.
Should I repair or replace my siding?
Cracked or wind-torn panels can be swapped individually if you can match the profile and color. Replace whole walls or the whole house when fading makes patches obvious, or when moisture is getting behind the siding.
What drives siding replacement cost up or down?
Removal of existing siding adds $1,000–$3,000; Grade: builder ($2–4/sq ft) to premium ($8–12/sq ft) is a 3× spread; Trim, soffit and fascia work often ride along; Sheathing or moisture damage found underneath.
Methodology & sources
National range cross-checked against multiple published 2026 cost guides (Angi, HomeGuide, Homewyse, This Old House, Fixr and trade publications) in July 2026.
State adjustment uses an editorial labor-cost index (0.85–1.35 vs national average) — a simplification of real regional variation.
Quality tiers apply published multipliers for material/type differences (Builder-grade vinyl / Standard vinyl / Insulated vinyl / fiber cement).
Ranges exclude financing, unusual site conditions, and code-upgrade surprises.